Control Panel Manufacturer in Yanbu
Saudi Control Panels Company is a control panel manufacturer in Yanbu for contractors working under Royal Commission rules, building MCC panels, switchboards and class-approved panels in Dammam for delivery to the Red Sea coast. We are approved by the Royal Commission for Jubail and Yanbu, as well as by Saudi Aramco and SABIC. Panels are tested in full before they are crated.
What you receive: a proposal setting out scope, standard, lead time, crating and delivery plan, returned one working day after your drawings or panel schedule. Request a quotation
Control panel manufacturer in Yanbu: what the industrial city needs
Yanbu Industrial City, the Royal Commission's industrial area at Yanbu Al Sinaiyah, centres on refining, petrochemicals and utilities. Their contractors normally ask for approved vendors, documented testing and corrosion-resistant enclosures. Our guide to IP ratings for panels in heat and humidity covers the enclosure choices for coastal air.
| Requirement | Specification | Standard | Typical lead time |
|---|---|---|---|
| Pump and process motor control | MCC panels, fixed or withdrawable, up to 4,000 A busbar | IEC 61439-1/-2 | 4–6 weeks |
| Power distribution | MDB and SMDB up to 6,300 A, Form 1 to 4b | IEC 61439-1/-2 | 3–5 weeks |
| Outdoor and coastal enclosures | SS304 or SS316, IP55 to IP66 | IEC 60529 | 3–5 weeks |
| Classified marine and offshore panels | To class rules and drawings | Class society rules | To be confirmed per project |
We build with ABB, Schneider Electric and Siemens components in Rittal enclosures.
Can you supply class-approved panels for Yanbu?
Yes. Yanbu's port and terminals mean that some panels fall under a classification society. We work to Lloyd's Register Rules for Classification and to RINA and ABS requirements. Share the class notation and the drawings, and the proposal states how each rule is met. Our marine and offshore panels page lists what we build.
What does Royal Commission approval mean for your order?
We are approved by the Royal Commission for Jubail and Yanbu, by Saudi Aramco and by SABIC, and we hold ISO 9001, ISO 14001 and ISO 45001 certification. In practice the approval file is the starting point: inspection and test plans, component data and test records are prepared as part of the build. The approved panel manufacturer page explains the documents. EPC teams working in Yanbu can also read our page for EPC contractors.
How do panels travel from Dammam to Yanbu?
Yanbu is more than 1,300 km from the Dammam workshop by road, so freight is planned from the first day.
- Line-ups are divided into shipping sections that fit a trailer.
- Panels are wrapped and crated for sea-air conditions, with desiccant for the journey.
- The packing list matches the general-arrangement drawing.
- A reassembly note and the test record travel with the load.
Panels are built and tested in our Dallah Industrial area workshop in Dammam, and our office is on King Khalid Street, Al Khobar. Delivery to Yanbu Industrial City, Yanbu Al Bahr or the port area is quoted in the proposal.
Our address
Saudi Control Panels Company King Khalid Street, Al Khobar, Eastern Province, Saudi Arabia Email: inquiry@saudicontrolpanels.com
Find Saudi Control Panels Company
How is a Yanbu panel order handled?
- You send drawings, class or vendor requirements and the delivery address.
- We return a proposal in one working day, with a compliance list.
- Drawings and the test plan go for approval. If you need the drawings produced, see panel design and drawings.
- Panels are built and wired in Dammam.
- The test is run and witnessed if required.
- Sections are crated and sent, and documents follow with the load.
Yanbu control panel questions
Who is the control panel manufacturer in Yanbu with Royal Commission approval?
Saudi Control Panels Company provides panels for Yanbu clients, building in Dammam and delivering to site. We are approved by the Royal Commission for Jubail and Yanbu, Saudi Aramco and SABIC, and were established in 2000.
What affects the cost of a control panel for Yanbu?
Cost depends on the busbar rating, short-circuit level, form of separation, number of feeders, enclosure material, class or vendor documentation and component brand. Packing and the road freight to Yanbu are priced as separate lines.
How long does a Yanbu panel order take?
Build time runs from one week for distribution boards to six weeks for MCC panels, followed by the road journey across the Kingdom. Your proposal gives a build date and a planned arrival date for the whole order.
Is there a control panel manufacturer near me in Yanbu?
The build takes place in Dammam, with the office in Al Khobar, a long way from Yanbu. Yanbu buyers use us for approved supply and tested panels, and we plan shipping with the same care as the build.
Can you work to a Royal Commission vendor specification?
Yes. Send the specification and we answer it clause by clause, build to the approved drawing revision and release the panels with the inspection and test record your project requires.
What should I send for a quotation?
Attach the single-line diagram, panel schedule or OEM drawings, the project specification, the enclosure location and class notation if one applies, and the date you need delivery in Yanbu, and we return the compliance list.
Need a control panel manufacturer in Yanbu? Share the specification and drawings, and a quotation reaches you within one working day. Email: inquiry@saudicontrolpanels.com | Request a quotation