Control Panel Manufacturer in the Eastern Province
Saudi Control Panels Company is a control panel manufacturer in the Eastern Province, working from our Dallah Industrial workshop in Dammam and an office in Al Khobar. We respond to Eastern Province site enquiries within one working day, and more than 150 panels a month are built in the Dammam workshop. One address covers design, build, testing and modification.
What you receive: a proposal that sets out scope, standard, lead time and price, sent within one working day of your single-line diagram, panel schedule or drawings. Request a quotation
Which Eastern Province areas can we reach quickly?
The workshops sit in the middle of the province's industrial belt, so most plants are a road trip rather than a flight. The distances below are approximate road figures from Dammam.
| Area | Typical facilities | Approx. distance | Panels often needed |
|---|---|---|---|
| Dammam, Dhahran, Al Khobar | Fabrication, logistics, buildings | Under 30 km | Switchboards, pump, ATS and VFD panels |
| Qatif and Ras Tanura | Refinery and terminal contractors, light industry | 25 to 75 km | Motor control, stainless field enclosures |
| Jubail | Petrochemicals, utilities, steel | About 90 km | MCC, MDB, outdoor panels |
| Abqaiq and Ras Al Khair | Gas processing, desalination, minerals | 60 to 200 km | MCC and control panels for pumping and process |
| Hofuf and Al Ahsa | Cement, building materials, food | About 130 km | MCC, dust-protected panels |
| Hafar Al Batin | Contractors, logistics | Over 400 km | Distribution and pump panels |
What can a regional panel builder do for you?
A single regional builder removes hand-offs. The same company draws the panel, builds it, tests it and later modifies it, and the records stay in one place. Our ratings and typical lead times are:
- LV switchboards, MDB and SMDB: up to 6,300 A, Form 1 to 4b, 3 to 5 weeks
- MCC panels: up to 4,000 A busbar, 4 to 6 weeks
- PLC and automation panel hardware: 2 to 4 weeks
- Custom, pump, ATS and VFD panels: 2 to 4 weeks
- Distribution boards up to 800 A: 1 to 2 weeks
- Stainless steel and outdoor panels, SS304 or SS316, IP55 to IP66: 3 to 5 weeks
All are built to IEC 61439-1/-2 or IEC 60204-1 as applicable. For the national scope, see our page on control panel manufacturing in Saudi Arabia.
Control panel manufacturer in the Eastern Province: how do we respond?
A site enquiry in the Eastern Province gets a response within one working day. For breakdowns, ageing boards and capacity upgrades, our panel modification and retrofit team surveys the board, prepares the new parts in the workshop and works to your outage window. The same speed applies to new builds, where the quotation also takes one working day.
Who needs panels in this region?
Oil and gas contractors, petrochemical and utility plants, desalination and water works, cement and building materials producers, food and packaging factories, and port and logistics operators. Our pages for water and utilities and cement and building materials cover the panel needs of those two sectors, and our Jubail page covers the industrial city.
We are approved by Saudi Aramco, SABIC and the Royal Commission, and certified to ISO 9001, ISO 14001 and ISO 45001. Vendor-listed projects get a documentation file with the panel.
Our address
Saudi Control Panels Company King Khalid Street, Al Khobar, Eastern Province, Saudi Arabia Email: inquiry@saudicontrolpanels.com
Find Saudi Control Panels Company
How does an Eastern Province order run?
- You send drawings, a panel schedule or a description of the fault.
- We confirm scope and issue a proposal within one working day.
- A site visit is arranged if the job needs measurements.
- The panel is built in Dammam and tested before it leaves.
- We deliver and, where needed, support installation.
- You keep the as-built drawings and test record for your maintenance file.
Eastern Province control panel questions
Who is the control panel manufacturer in the Eastern Province with local workshops?
Saudi Control Panels Company provides panel design, build and testing across the Eastern Province from its workshop in Dammam and an office in Al Khobar. We have worked on projects for Saudi Aramco, SABIC and the Royal Commission, and were established in 2000.
What affects the cost of a panel for an Eastern Province plant?
Cost is set by the current and fault rating, the type and number of feeders, the enclosure material and IP rating, and the component brand. Distance within the province adds delivery cost only, and your proposal shows it as a separate line.
How long does a panel take to reach my Eastern Province site?
Build time ranges from one week for a small distribution board to six weeks for a large MCC, and delivery within the province is a road trip of hours. The proposal confirms one arrival date once drawings are approved.
Is there a control panel manufacturer near me in the Eastern Province?
Yes. With a workshop in Dammam and an office in Al Khobar, most of the province's industrial cities are within a few hours by road. Send your drawings and we will confirm the visit and delivery plan.
Can you service or modify an existing panel on site?
Yes. We survey the panel, quote the work, prepare parts in the workshop and carry out the modification during your outage. Updated drawings are returned afterwards so your records match what is installed.
What should I send for a quotation?
Send your single-line diagram, panel schedule, OEM drawings or, for a retrofit, photographs of the existing board and its nameplate. Add the site location and the date you need the work finished.
Need a control panel manufacturer in the Eastern Province? Tell us the site and the duty, and the quotation arrives within one working day. Email: inquiry@saudicontrolpanels.com | Request a quotation