Danfoss VFD Panels in Saudi Arabia
Saudi Control Panels Company is an authorised Danfoss partner and builds Danfoss VFD panels in Saudi Arabia, housing VLT and VACON drives with bypass, line reactors and ventilation sized for pumps, fans and chillers in Dammam. Cooling is calculated from the drive losses, not guessed. Custom VFD panels typically take 2–4 weeks.
What you receive: a written proposal with the Danfoss drive models, bypass arrangement, cooling method, lead time and price, issued within one working day of your motor list or drawings. Request a quotation
What does a Danfoss drive panel cost?
The price follows motor power, number of drives, bypass, filters and enclosure. Drive size drives the cost, but cooling and protection often add more than buyers expect. As an authorised Danfoss partner we price drive and panel together from your motor list. Send kW ratings, supply voltage, cable lengths and ambient conditions; the proposal itemises each choice so you can compare alternatives.
Danfoss VFD panels in Saudi Arabia: what we deliver
| Panel | Rating | Standard | Lead time |
|---|---|---|---|
| Single and multi-drive VFD panels | VLT or VACON drives to specification, with line reactors or filters where drawn | IEC 61439-1/-2, IEC 60204-1 | 2–4 weeks |
| Pump and HVAC panels with bypass | To specification | IEC 61439-1/-2 | 2–4 weeks |
| MCC panels | Fixed or withdrawable, up to 4,000 A busbar, DOL, star-delta, soft-starter or VFD feeders | IEC 61439-1/-2 | 4–6 weeks |
| Factory acceptance test | In-house routine verification; customer or third-party witness welcome | IEC 61439-1/-2 | Included |
Which Danfoss drives do we build into panels?
- VLT HVAC Drive for fans, chillers and air handlers.
- VLT AQUA Drive for pumps and water treatment.
- VLT AutomationDrive for industrial machines and process lines.
- VACON drives for demanding process and marine duties.
Each drive sits in a section with filtered ventilation or an air conditioner, line reactors or harmonic filters where drawn, and a bypass so the motor can run direct if the drive is out of service. See VFD panels and pump control panels for panel layouts, and HVAC and district cooling for the typical chiller and fan duty.
How do we keep a Danfoss drive cool in a Saudi summer?
We read the drive's loss figure from the datasheet, add the other heat sources in the panel, and choose filter fans, a heat exchanger or an air conditioner to keep the air inside the drive's rated ambient. The datasheet gives the rated temperature and the derating above it, so the proposal records the design ambient it assumes.
- Enquiry. Motor list, supply and site ambient reach us.
- Sizing. Drive, reactor and cooling are selected.
- Approval. Layout and schematics go to you.
- Build. Drives, bypass and wiring are assembled.
- Test. Insulation, control and protection are verified at FAT.
- Delivery. The panel goes to site in any region.
- Handover. Parameter notes and drawings follow.
Experience behind our drive panels
Saudi Control Panels Company has built panels since 2000 and is approved by Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu. We have worked on projects for Saudi Electricity Company in Jeddah and for MODON in Dammam. The Dallah Industrial workshop in Dammam builds more than 150 panels a month under ISO 9001, ISO 14001 and ISO 45001. The partners page lists the other drive and component brands.
Danfoss VFD panel questions
Who builds Danfoss VFD panels in Saudi Arabia?
Saudi Control Panels Company provides Danfoss VFD panels with bypass and ventilation from its Dammam workshop. We are an authorised Danfoss partner, and our panels are tested to IEC 61439 routine verification before dispatch.
What is the operating temperature of a Danfoss VFD?
It depends on the model and enclosure rating, and the datasheet states the rated ambient and the derating above it. We design the panel cooling to stay inside that figure for your site, and record the assumed ambient in the proposal.
What parameters should be set on a Danfoss VFD?
Commissioning normally starts with motor nameplate data, ramp times, minimum and maximum speed, control source and protection limits. Our workshop test checks the drive powers up and responds; final settings are agreed with your commissioning engineer and recorded in the handover file.
What affects the cost of a Danfoss drive panel?
Motor power, drive count, bypass, line reactors or filters, enclosure and IP rating, cooling and testing set the price. Larger drives cost more, but cooling and protection can add as much. Send the motor list for an itemised proposal.
How long does a Danfoss VFD panel take?
Custom VFD, pump and HVAC panels typically take 2–4 weeks. Drive supply and drawing approval set the date, so we confirm drive availability when the drawings are approved and flag any longer-lead drives.
Where can I buy Danfoss in Saudi Arabia?
For drives that belong in a panel, buy them through us as part of the build; they arrive mounted, wired and tested. Send your motor list in the enquiry and the proposal shows the drive models and any loose-supply items.
Need Danfoss VFD panels in Saudi Arabia? Send your motor list or drawings and receive a quotation within one working day.