Phoenix Contact Control Panel Components in Saudi Arabia
Saudi Control Panels Company is an authorised Phoenix Contact partner and fits Phoenix Contact control panel components in Saudi Arabia, wiring terminal blocks, power supplies and relay modules into control panels and switchboards in Dammam. The neat result is easier to test and maintain. Custom control panels typically take 2–4 weeks.
What you receive: a written proposal naming the terminals, power supplies and relay modules, the standard, the lead time and the price, issued within one working day of your drawings or I/O list. Request a quotation
What is a Phoenix Contact used for in a panel?
It connects and conditions signals. Terminal blocks join field cables to panel wiring, relay modules switch loads from PLC outputs, and power supplies feed the control circuits. As an authorised Phoenix Contact partner we use these parts as the backbone of our control cabinet building. Each choice reduces wiring time and makes the panel easier to fault-find years later. Read more about control panel wiring.
Phoenix Contact control panel components in Saudi Arabia: what we fit
| Panel | Rating | Standard | Lead time |
|---|---|---|---|
| Terminal and wiring systems | CLIPLINE terminal blocks with Push-in connection, marked and grouped by function | IEC 60204-1 | 2–4 weeks |
| PLC and automation panel hardware | Siemens, Rockwell and Schneider PLC hardware integrated per drawings | IEC 60204-1 | 2–4 weeks |
| Custom control, pump and VFD panels | To specification | IEC 61439-1/-2, IEC 60204-1 | 2–4 weeks |
| Factory acceptance test | In-house routine verification; customer or third-party witness welcome | IEC 61439-1/-2 | Included |
Which Phoenix Contact parts do we use?
- CLIPLINE terminal blocks with Push-in connection, which accept ferruled wires without a screwdriver.
- QUINT POWER and TRIO POWER supplies for 24 V control circuits.
- PLC-INTERFACE relay modules between PLC outputs and field loads.
- Surge protection and signal conditioners where the schematic calls for them.
- CLIPX ENGINEER marking data for printed terminal and wire labels.
Push-in terminals hold a wire firmly without re-tightening, which matters on panels subject to plant vibration. We draw terminal numbers into the schematic first, then print the markers from the same data, so site labels match the drawing.
How are Phoenix Contact components built into a panel?
- Enquiry. Drawings or an I/O list reach us.
- Terminal plan. Rails, groups and spare terminals are drawn.
- Approval. You review the layout and schematic.
- Build. Rails are mounted, wires ferruled and markers fitted.
- Test. Each circuit is checked at FAT.
- Delivery. The panel ships to any region.
- Records. Terminal schedules and as-built drawings follow.
Who builds with us and where
Saudi Control Panels Company has operated since 2000 and is approved by Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu. We have worked on projects for MODON in Dammam and for Saudi Aramco in Jubail. The Dallah Industrial workshop in Dammam builds more than 150 panels a month, and ISO 9001, ISO 14001 and ISO 45001 apply. Automation work is covered under PLC and automation panels, and the partners page lists the other brands.
Phoenix Contact panel questions
Who supplies Phoenix Contact control panel components in Saudi Arabia?
Saudi Control Panels Company provides Phoenix Contact terminals, supplies and relay modules inside control panels built in Dammam. We are an authorised Phoenix Contact partner, and the components arrive installed, wired and tested.
Where can I buy Phoenix Contact?
When the parts belong in a panel, buy them through us as part of the build; you receive them mounted, ferruled and tested. Other requirements can be raised in the same enquiry, and the proposal states what is supplied loose and what is installed.
What is a Phoenix Contact relay?
It is a compact switching module, often a slim interface relay that lets a low-power PLC output control a larger load or isolate a signal. Plug-in versions allow quick replacement. We place them on rails with marked terminals, so field wiring stays tidy.
What affects the cost of a Phoenix Contact wired panel?
Terminal count, relay and supply ratings, enclosure and IP rating, wiring density and testing set the price. Push-in terminals shorten labour but cost more per terminal. The proposal itemises each factor from your I/O list.
How long does a Phoenix Contact wired panel take?
Custom control panels typically take 2–4 weeks. Drawing approval and the supply of terminals, supplies and any PLC hardware set the date, so we confirm availability when the drawings are signed off.
What should I send to get a quotation?
Send the I/O list, schematics or functional description, plus the IP rating and delivery location. If your plant standardises on specific terminal or relay references, list them so the bill of materials matches.
Need Phoenix Contact control panel components in Saudi Arabia built into a panel? Share your schematics and a quotation follows within one working day.