Control Panel Builder in Saudi Arabia
Saudi Control Panels Company is a control panel builder in Saudi Arabia and an authorised partner of Siemens, Schneider Electric, ABB, Rittal, Elcontrol, Rockwell Automation, Eaton, Phoenix Contact, Danfoss, Omron and Legrand. We assemble switchboards, MCC, control and VFD panels in Dammam around the brand your specification names. Typical lead times run from 1–2 weeks to 6 weeks.
What you receive: a written proposal naming the brand devices, the standard, the lead time and the price, issued within one working day of your single-line diagram, schedule or drawings. Request a quotation
Which brands do we build panels with?
Each brand page explains the ranges we assemble and what to send for a quotation.
- Siemens. SENTRON breakers, SIRIUS motor control and SIMATIC controllers in switchboards, MCC and PLC panels.
- Schneider Electric. Masterpact and ComPacT breakers with TeSys and Altivar gear for switchboards, distribution boards and MCC.
- ABB. Emax 2 and Tmax XT breakers with ACS drives for MCC, switchboards and VFD panels.
- Rittal. TS 8, VX25 and AX enclosures with climate control for every panel family.
- Elcontrol. Panel energy meters cut into switchboard and MCC doors, from our authorised Italian technology partner.
- Rockwell Automation. Allen-Bradley ControlLogix and PowerFlex panels for plant automation.
- Eaton. NZM breakers, xEnergy-style arrangements and motor-control gear for low-voltage boards.
- Phoenix Contact. CLIPLINE terminals, power supplies and relay modules for neat control wiring.
- Danfoss. VLT and VACON drives in ventilated VFD and bypass panels for pumps and HVAC.
- Omron. NX and NJ controllers with S8VK supplies for compact machine and process panels.
- Legrand. XL3 boards with DX3 and DPX3 breakers for distribution boards up to 800 A.
Control panel builder in Saudi Arabia: what we deliver
| Panel | Rating | Standard | Lead time |
|---|---|---|---|
| LV switchboards / MDB / SMDB | Up to 6,300 A, 380–415 V 60 Hz, Form 1–4b, up to 100 kA short-circuit rating per design verification | IEC 61439-1/-2 | 3–5 weeks |
| MCC panels | Fixed or withdrawable, up to 4,000 A busbar, DOL, star-delta, soft-starter or VFD feeders | IEC 61439-1/-2 | 4–6 weeks |
| Distribution boards | Up to 800 A | IEC 61439-1/-3 | 1–2 weeks |
| PLC and automation panel hardware | Siemens, Rockwell and Schneider PLC hardware integrated per drawings | IEC 60204-1 | 2–4 weeks |
| Custom, pump, ATS and VFD panels | To specification | IEC 61439-1/-2, IEC 60204-1 | 2–4 weeks |
| Factory acceptance test | In-house routine verification; customer or third-party witness welcome | IEC 61439-1/-2 | Included |
Why does the brand matter in a panel specification?
Maintenance teams keep spares and training for a few makes, and consultants name those makes so every board on site matches. A panel built around the wrong breaker family forces a second spares stock and a second set of settings software. Because we are authorised for all eleven brands, one workshop can build mixed-make projects, and one test record covers the whole assembly. Our control panel manufacturer overview shows how the ranges fit together, and the LV switchboards, MCC panels and PLC and automation panels pages give ratings.
Who is the manufacturer of electrical panel boards in Riyadh?
Panel boards for Riyadh sites are built at our Dammam workshop and delivered to the capital with their drawings and test records. The same applies to Jubail, Jeddah and Yanbu. If the specification gives a brand, the matching page above lists the device families we fit. For dispatch dates, see the lead-time column in the table and ask for confirmation when you send the drawings.
How does a brand-specific panel order proceed?
- Enquiry. You send the diagram, schedule or drawings and name the brand.
- Device list. We map each load to a catalogue reference.
- Approval. Layouts and datasheets go to your consultant.
- Build. Busbars, devices and wiring follow the approved set.
- Test. Routine verification is recorded at factory acceptance.
- Delivery. The panel is dispatched to any region.
- Handover. As-built drawings and settings accompany it.
The company behind the partner pages
Saudi Control Panels Company has built panels in Saudi Arabia since 2000 and is approved by Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu. We have worked on projects for Saudi Aramco in Jubail, the Royal Commission in Jizan, Saudi Electricity Company in Jeddah and MODON in Dammam. ISO 9001, ISO 14001 and ISO 45001 cover the work, and the Dallah Industrial workshop in Dammam builds more than 150 panels a month.
Partner brand questions
Who is a control panel builder in Saudi Arabia that works with all major brands?
Saudi Control Panels Company provides panels built with eleven partner brands from its Dammam workshop. We are an authorised partner of each of them, we have built panels since 2000, and Saudi Aramco, SABIC and the Royal Commission have approved us.
What is an electrical control panel?
It is an enclosure holding the breakers, contactors, relays, drives and controllers that start, protect and monitor equipment. Power versions such as switchboards and MCCs distribute energy; control versions hold PLCs and instruments. Both are built to IEC standards and tested before delivery.
What affects the cost of a branded panel?
Device ratings, short-circuit level, form of separation, feeder count, drives, enclosure and IP rating, and the witness-test plan set the price. Using one brand across a board lowers spares variety. Send the drawings and the proposal itemises each factor.
How long does a branded panel take?
Distribution boards take 1–2 weeks, PLC and custom panels 2–4 weeks, switchboards 3–5 weeks and MCC panels 4–6 weeks. Drawing approval and the supply of large breakers or drives usually decide the real date.
Are you the distributor for these brands?
Our role is panel building. We buy the devices for each order and assemble them into verified boards, with our own drawings and test record. For loose components with no assembly, ask in the enquiry and we state what we can quote.
Can one panel mix brands?
Yes. Many specifications name Siemens incomers with ABB drives, or Rittal enclosures around a Schneider Electric board. We draw the mixed device list, check ratings and heat, and issue a single test record for the assembly.
Looking for a control panel builder in Saudi Arabia that works with your brand? Send the drawings and a quotation follows within one working day.