Siemens Panel Builder in Saudi Arabia
Saudi Control Panels Company is an authorised Siemens partner and a Siemens panel builder in Saudi Arabia, assembling LV switchboards, motor control centres and PLC panels in Dammam. Each assembly is verified to IEC 61439 before dispatch, and the Siemens device list follows your single-line diagram. Switchboards typically leave the workshop in 3–5 weeks.
What you receive: a written proposal listing every Siemens device by type and rating, the standard, the lead time and the price, issued within one working day of your single-line diagram or panel schedule. Request a quotation
Which Siemens devices go into our panels?
Plants that already hold Siemens spares usually want the same family in the new board. As an authorised Siemens partner we fit the ranges below and size them to the duty on your drawings.
- SENTRON 3WL air circuit breakers for incomers and bus-ties, 3VA moulded-case breakers for outgoing feeders.
- SIRIUS contactors, overload relays, motor starters and soft starters in MCC feeders.
- SIMATIC S7-1200 and S7-1500 controllers with ET 200SP remote I/O, wired and tested in the cabinet.
- SINAMICS drives mounted in ventilated VFD sections.
- SIVACON low-voltage switchgear arrangements where the specification names the system.
Busbars, wiring and labelling are done by our own team, and each device is mounted to the maker's derating and spacing rules. See LV switchboards and MDB for the board ranges.
Siemens panel builder in Saudi Arabia: what we deliver
| Panel | Rating | Standard | Lead time |
|---|---|---|---|
| LV switchboards / MDB / SMDB | Up to 6,300 A, 380–415 V 60 Hz, Form 1–4b, up to 100 kA short-circuit rating per design verification | IEC 61439-1/-2 | 3–5 weeks |
| MCC panels | Fixed or withdrawable, up to 4,000 A busbar, DOL, star-delta, soft-starter or VFD feeders | IEC 61439-1/-2 | 4–6 weeks |
| PLC and automation panel hardware | Siemens, Rockwell and Schneider PLC hardware integrated per drawings | IEC 60204-1 | 2–4 weeks |
| Factory acceptance test | In-house routine verification; customer or third-party witness welcome | IEC 61439-1/-2 | Included |
Can you build to a Siemens switchboard specification?
Yes. Send the consultant's clauses with the single-line diagram and the proposal answers them one by one, naming each Siemens breaker, relay and drive by order reference. Where the document asks for a complete SIVACON arrangement, say so at enquiry and the proposal sets out the exact scope we supply. For controls, our PLC and automation panels arrive with the Siemens CPU, I/O and power supplies installed and ready for programming.
How is a Siemens-based panel built, tested and delivered?
- Enquiry. You send the diagram, schedule or OEM drawings.
- Device list. We map each load to a SENTRON, SIRIUS or SINAMICS reference.
- Submittal. General arrangement, schematics and datasheets go to you for sign-off.
- Procurement. Siemens devices and enclosures are ordered against the approved list.
- Build. Busbars, devices and wiring are assembled to the approved drawings.
- Factory acceptance test. Routine verification runs in-house, as set out under panel FAT and testing.
- Delivery and records. The board ships with as-built drawings and the signed test record.
Where we have built Siemens-based panels
Saudi Control Panels Company has built panels in Saudi Arabia since 2000 and is approved by Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu. We have worked on projects for Saudi Aramco in Jubail and for the Royal Commission in Jizan. ISO 9001, ISO 14001 and ISO 45001 govern the work, and the Dallah Industrial workshop in Dammam builds more than 150 panels a month. We respond to Eastern Province enquiries within one working day and deliver to every region. The partners overview lists the other brands we build with.
Siemens panel builder questions
Who is the Siemens panel builder in Saudi Arabia?
Saudi Control Panels Company provides Siemens-based LV switchboards, MCC and PLC panels from its Dammam workshop. We are an authorised Siemens partner, we have built panels since 2000, and Saudi Aramco, SABIC and the Royal Commission have approved us.
What affects the cost of a Siemens-based panel?
Price follows breaker frame sizes, short-circuit rating, form of separation, number of motor feeders, drive ratings, enclosure and IP rating, and whether a customer witness test is planned. Copper content moves it too. Send the diagram and the proposal prices each of these separately.
How long does a Siemens-based panel take?
Switchboards typically take 3–5 weeks, MCC panels 4–6 weeks and PLC panel hardware 2–4 weeks. The build starts once your drawings are approved, so quick sign-off protects the date more than any workshop change. Long-lead breakers are flagged in the proposal.
Who supplies Siemens switchgear in Saudi Arabia?
Saudi Control Panels Company provides Siemens-based boards on the panel-building side, while Siemens sells devices through its own offices and distributors. We buy the Siemens devices, assemble them into verified boards and test the assembly, so you receive one document set instead of loose components.
Do you build Siemens HT panels?
Our work is low-voltage: switchboards to 6,300 A, MCC and control panels at 380–415 V. Medium-voltage switchgear is outside our range, but we build the LV boards and control panels that sit downstream of an MV substation.
What should I send to get a quotation?
Send the single-line diagram or panel schedule, any specification clauses naming Siemens devices, the IP rating, the short-circuit level and the delivery location. If your site stocks particular Siemens spares, list them so the device schedule matches.
Looking for a Siemens panel builder in Saudi Arabia? Send the drawings for your Siemens-based board and a quotation follows within one working day.