Rittal Control Panel Builder in Saudi Arabia
Saudi Control Panels Company is an authorised Rittal partner and a Rittal control panel builder in Saudi Arabia, fitting switchboards, MCC sections and control panels into TS 8, VX25 and AX enclosures at its Dammam workshop. You name the enclosure in the specification; we mount, wire, test and deliver it. Lead times run from 1–2 weeks for distribution boards to 3–5 weeks for switchboards.
What you receive: a written proposal with the enclosure type, IP rating, scope, standard, lead time and price, issued within one working day of your drawings or panel schedule. Request a quotation
What is a Rittal panel and why specify one?
A Rittal panel is a control or power assembly built inside a Rittal system enclosure. Frame, mounting plates, busbar supports and accessories all come from one catalogue, so site staff can reorder matching parts years later. As an authorised Rittal partner we order the enclosure with the panel and fit it out ourselves. Pre-punched frames also keep builds square and doors sealing evenly, which makes each panel quicker to inspect.
Rittal control panel builder in Saudi Arabia: what we deliver
| Panel | Rating | Standard | Lead time |
|---|---|---|---|
| Enclosures | Rittal TS8, AX and VX25 and local enclosures, IP31–IP66 | IEC 60529 | Dated in the proposal |
| LV switchboards / MDB / SMDB | Up to 6,300 A, 380–415 V 60 Hz, Form 1–4b, up to 100 kA short-circuit rating per design verification | IEC 61439-1/-2 | 3–5 weeks |
| MCC panels | Fixed or withdrawable, up to 4,000 A busbar, DOL, star-delta, soft-starter or VFD feeders | IEC 61439-1/-2 | 4–6 weeks |
| Custom, pump, ATS and VFD panels | To specification | IEC 61439-1/-2, IEC 60204-1 | 2–4 weeks |
| Factory acceptance test | In-house routine verification; customer or third-party witness welcome | IEC 61439-1/-2 | Included |
Which Rittal enclosure suits my panel: TS 8, VX25 or AX?
Equipment size, floor space and environment decide it.
- TS 8 floor-standing frames for switchgear, MCC sections and deep control cabinets.
- VX25 modular enclosures with a fine mounting pattern, for dense layouts or several bayed cabinets.
- AX compact sheet-steel boxes for local starters and instrument panels.
- Ri4Power busbar and switchgear components where the specification asks for a Rittal switchboard system.
Send the equipment list and the available space; the general arrangement drawing shows the choice before anything is ordered. Heat matters as much as size: we work out the watts released by drives and power supplies and choose filter fans, a heat exchanger or an air conditioner to suit the Eastern Province summer. For fabricated stainless or outdoor housings instead, see stainless steel and outdoor panels, and for the trade-off read Rittal versus local enclosures.
How is a Rittal-based panel built, tested and delivered?
- Enquiry. You send diagrams, schedule and an enclosure preference.
- Selection. We confirm family, size, IP rating and cooling.
- Drawings. The general arrangement goes to your consultant for mark-up.
- Order. Enclosures and accessories are bought on the approved revision.
- Build. Plates and busbars are mounted, equipment installed and wiring completed.
- Test. Routine verification is recorded and may be witnessed.
- Delivery. Panels travel with their enclosure finish protected, plus as-built documents.
Why plants use us for Rittal-based panels
Saudi Control Panels Company has worked in Saudi Arabia since 2000 and is approved by Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu. We have worked on projects for Saudi Aramco in Jubail and for MODON in Dammam. The Dallah Industrial workshop in Dammam builds more than 150 panels a month, and ISO 9001, ISO 14001 and ISO 45001 cover the work. Where a project needs a fabricated enclosure, our welding qualifications to ASME, AWS and DIN EN apply. Other makes are listed on the partners page, and Rittal-based boards feed our LV switchboards and MCC panels.
Rittal panel builder questions
Who is a Rittal control panel builder in Saudi Arabia?
Saudi Control Panels Company provides Rittal-based switchboards, MCC and control panels from its Dallah Industrial workshop in Dammam. We are an authorised Rittal partner, with approval from Saudi Aramco, SABIC and the Royal Commission.
Is Rittal a manufacturer?
Yes. Rittal is a German manufacturer of enclosures, power distribution and climate control equipment. We are an independent panel builder: we buy the enclosure, fit and wire the equipment inside it, test the finished assembly and deliver it with our own documentation.
What affects the cost of a Rittal panel enclosure?
The enclosure family, size, IP rating, finish, mounting plate, busbar accessories and any cooling set the price. Inside the panel the equipment usually costs far more than the box. The proposal prices enclosure and equipment separately.
How long does a Rittal-based panel take to build?
Distribution boards take 1–2 weeks, custom control panels 2–4 weeks, switchboards 3–5 weeks and MCC panels 4–6 weeks. The longest item in the bill of materials sets the pace, so large breakers and drives are dated in the proposal.
Can you supply a panel in a local enclosure instead?
Yes. We build in Rittal and local enclosures from IP31 to IP66. If your specification names another make, or you want to reduce enclosure cost, we quote both routes with the same internal layout so you can compare them.
Can my consultant approve the layout first?
Yes. We issue the general arrangement with enclosure type, dimensions, mounting layout and cooling before any order. Your consultant marks it up, we revise, and the enclosure is ordered only on the approved revision.
Looking for a Rittal control panel builder in Saudi Arabia? Share the layout of your Rittal-based board and a quotation follows within one working day.